The Pinnacle is a peaked modular frame structure designed with our newly developed aluminium extrusion.
The new aluminium extrusion does away with the tedious job of having to tie the fabric to the frame, it just slides into the extrusion in the aluminium. The frame is covered with a PVC coated polyester, the roof being patterned into a tensile cone.
The peak is held up by a floating mast which is supported by two diagonal cables attached to the corner posts. The extruded aluminium frame requires no lacing of fabric to the frame. The walling slides as curtains so there is no need to unhook or dismantle them.
The roof is assembled on the ground for ease of erection then hoisted onto the split uprights. The roof is tensioned on a cabling system and a floating main mast. When fully erected it becomes a very sturdy structure. There is provision for joining the structures together with a water proof guttering system. The patterned roof minimises flapping and the resultant noise factors.
Modular aluminium alloy extruded frame structure. Main pole (floating) supported by two diagonal cables.
PVC coated polyester fabric. Waterproof
700gsm Translucent (std. no lacquer),
700gsm Translucent and 780gsm Block-out, UV, FR, AF, (acrylic coated one side)
840gsm Block-out, UV, FR, AF,(acrylic coated both sides)
PVC walling, slides as curtains
3m x 3m
4m x 4m
5m x 5m
Get In Touch
Tel: +27 31 700 4600
Fax: +27 86 667 8231
Tel: +27 11 892 1017/+27 82 465 6616
Fax: +27 86 502 5766
2 Hocking Place, Westmead
Durban, KZN, South Africa
23 Grader Road, Unit C05 & C06, Spartan, Kempton Park
Gauteng, South Africa.